AEROSPACE
HOSE |
|
101
111
112
124
130
156
170
171
191
193
|
• Mid-State Aerospace, Inc. is a fully authorized distributor
and hose fabricator for Parker/Stratoflex
• 2 - 3 day lead time on most instock items
• Test 100% of all hose assesmblies
• ID tag with lot control |
|
|
|
101
| Hose 101 |
Specification Reference: SAE AS4897
& AS150 TYPE IaB |
| Temperature Range: |
-65 to +450ºF (-54 to +232ºC) |
| Reinforcement: |
Corrosion-Resistant steel wire braid |
| Description: |
Lightweight, low pressure, high temperature, engine
hose. |
| Application: |
High temperature fuel or lube systems with pressures
below 1000 PSI, requiring lighter weight and smaller
bend radius. |
| Additional Info: |
101 hose was developed for Pratt & Whitney for
the F119 Jet Engine. It is lighter than 124 and has
a better bend radius. |
|
| |
111
| Hose 111 |
Specification Reference: MIL-H-8794 |
| Temperature Range: |
Size -3 thru -12:-65 to +250°F (-54 to +121°C)
Size -16 thru -48: -40 to +250°F (-40 to +121°C)
|
| Reinforcement: |
One fiber braid and one high tensile steel wire
braid |
| Inner Tube: |
Oil Resistant Elastromeric |
| Description: |
High Pressure Hydraulic Hose. |
| Application: |
Aircraft Hydraulic, pneumatic, coolant, fuel and
oil systems. |
|
| |
112
| Hose 112 |
Specification Reference: MIL-H-8788 |
| Temperature Range: |
-65° to 200°F (-54 + 93°C) |
| Reinforcement: |
Two or more high tensile steel wire braids |
| Inner Tube: |
Compounded Seamless Polychloroprene |
| Description: |
High Pressure Hydraulic Hose. |
| Application: |
3000 PSI hydraulic systems, air or inert gas. For
gaseous service, the cover should be perforated. |
|
| |
124
| Hose 124 |
Specification Reference: MIL-H-27267,
AS1946, MIL-H-25579 |
| Temperature Range: |
-65 to +450ºF (-54 to +232ºC) |
| Reinforcement: |
Corrosion-Resistant steel wire braid(s) (Suffix
"Z" indicates two wire braid construction) |
| Inner Tube: |
Extruded, conductive PTFE |
| Description: |
High Compatibility, Non-aging, multi-applicable. |
| Application: |
High temperature, medium pressure, aircraft and
missile fuel, lube oil, coolant, hydraulic, ballistic
and pneumatic systems. |
|
| |
130
| Hose 130 |
Specification Reference: Similar to MIL-H-8794 |
| Temperature Range: |
-65 to +300ºF (-54 to +149ºC) |
| Reinforcement: |
One fiber braid and one wire braid of high tensile steel wire |
| Inner Tube: |
Seamless oil resistant compounded inner-tube |
| Description: |
Preferred over military standard assemblies because of less weight and small bend radii. |
| Application: |
Medium pressure service with petroleum base fuel and oil. |
|
| |
156
| Hose 156 |
Specification Reference: MIL-H-83797 |
| Temperature Range: |
-65 to +300°F (-54 + 149°C) |
| Reinforcement: |
One and One-Half Corrosion Resistant steel wire
braids |
| Inner Tube: |
Seamless HSP oil resistant compounded inner-tube |
| Description: |
Medium Pressure Lightweight Engine Hose. |
| Application: |
Medium Pressure service with most petroleum base
oils, JP Fuels, aviation gasoline, lubricants and
many synthetic based fluids. |
| Additional Info: |
Most common rubber hose for general purpose use.
Preferred by helicopter OEMs. Replaces 113, 123 &
176. |
|
| |
170
| Hose 170 |
Specification Reference: AS604 (FORMERLY
MIL-H-38360) |
| Temperature Range: |
-65 to +400ºF (-54 to +204ºC) |
| Reinforcement: |
Corrosion resistant steel wire |
| Inner Tube: |
Extruded, conductive PTFE |
| Description: |
Heavy Duty 3000 PSI, non-aging aircraft hose. |
| Application: |
High temperature and high pressure aircraft and
missile hydraulic systems in high vibration applications.
|
| Additional Info: |
This hose is commonly used for high vibration applications
where extreme integrity is required, such as at the
hydraulic pump outlet. |
|
| |
171
| Hose 171 |
Specification Reference: AS1339 (FORMERLY
MIL-H-38360), AS1624 |
| Temperature Range: |
-65 to +400ºF (-54 to +204ºC) |
| Reinforcement: |
High density braid of small diameter Cres wire |
| Inner Tube: |
Extruded, conductive PTFE |
| Description: |
Lightweight 3000 PSI, non-aging aircraft hose. |
| Application: |
High temperature and high pressure aircraft and
missile hydraulic systems. |
| Additional Info: |
This hose is commonly used for high vibration applications
where extreme integrity is required, such as at the
hydraulic pump outlet. |
|
| |
191
| Hose 191 |
Specification Reference: AS1339 (FORMERLY
MIL-H-38360) |
| Temperature Range: |
-65 to +275ºF (-54 to +135ºC) |
| Reinforcement: |
High density braid of Corrosion resistant steel
wire |
| Inner Tube: |
Seamless extruded, conductive PTFE |
| Description: |
High pressure landing gear hose. |
| Application: |
High Pressure aircraft hydraulic systems (landing
gear) |
| Additional Info: |
Covered with black/yellow CorduraTM for exceptional
abrasion resistance. |
|
| |
193
| Hose 193 |
Specification Reference: MIL-H-5593 |
| Temperature Range: |
-65 to +165°F (-54 to +74°C) |
| Reinforcement: |
One braid of high tensile fiber cord |
| Inner Tube: |
Compounded Seamless Buna-N |
| Description: |
Low Pressure Engine Hose |
| Application: |
Vacuum service 20"Hg sizes -2 thru -6; 10"Hg
sizes -8 and -10 |
|
|
